导航
Language

EN

CN

JA

KR

SP

IT

FR

DE

001
Homepage
>
Metal-polymer self-lubricating
Metal-polymer self-lubricating bearings

Metal-polymer self-lubricating bearings

Two-layer metal-polymer self-lubricating bearing consists of metal backing with PTFE compounded on the surface. It is lighter and has better mechanical and load performance. The thicker PTFE layer can improve the installation flexibility and can also match wider designed tolerance range. In addition, the wear resistance and noise absorbing feature is improved while more variable torque range could be fitted.

CSB
CSB
CSB
CSB
CSB
CSB
CSB
CSB
CSB
CSB

Products Show

CSB-50
CSB-50
The material is with good wear resistance, low friction coefficient, corrosion resistance and high chemical resistance. It is suitable for the applications where the lubricating is hard to or not accessible. The machining requirement of the mating parts is not critical, so this kind of materials are widely used in general industry.
CSB-50MP/MB
CSB-50MP/MB
The material is designed specially with thicker PTFE layer for the purpose of being machinable after assembling to improve higher tolerance requirement as well as to absorb the operating noise. It is suitable for the applications with high requirement of wear resistance, dry friction and maintenance free.
CSB-50DH
CSB-50DH
The material is with good wear resistance, low friction coefficient,weather resistance and high temperature resistance. It is suitable for the applications where the stable torque requirement must be satisfied by calibration after assembling of the bearings.
CSB-50EC
CSB-50EC
The mechanical feature of this material is similar with CSB-50DH.The special additives provide the electrical conductivity of the material to ensure the further coating process of the assembly at customer end. The nominated resistance is less than 1000 Ohm.
CSB-40
CSB-40
The material is designed for the application conditions of high speed and mid-to-high load. The lipophilic fibre improves the hydrodynamic lubrication performance. It is a material with good resistance of cavitation corrosion and fluid corrosion. It is suitable for high PV requirement.
CSB-40HL
CSB-40HL
The material is optimized based on CSB-40 for the applications with high PV value under hydrodynamic lubricating. While providing outstanding low friction and wear resistance performance, it has excellent fatigue resistance and cavitation corrosion resistance feature.
CSB-11
CSB-11
The material has the similar feature with the standard steel backed polymer composite bearings. In addition, the bronze back provides better corrosion resistance and thermal conductivity. Therefore it is easier for the assembling and it has better magnetic resistance feature.
CSB-12/12EC
CSB-12/12EC
CSB-12 is designed for light weight and thin wall bearing, the thicker PTFE layer is suitable for the calibration process after the bearing is assembled. This material also provides low friction and low noise features. CSB-12EC is optimized based on CSB-12 with special additives to achieve the electrical conductivity of the material.
CSB-25
CSB-25
The relatively thick bearing layer is designed for good wear resistance and with low noise feature, it is suitable for calibration after assembling to improve the precision mating tolerance. The aluminum is a light material with good corrosion resistance feature.
上一页
1
2
Zhejiang Changsheng Sliding Bearing Co., Ltd.

FIND US,

Want to get in touch?

Zhejiang Changsheng Sliding Bearing Co., Ltd.

ADD.: No.6, Xinda Road,Economic Development Zone, Jiashan, Zhejiang, China
TEL: +86-573-84184307
FAX: +86-573-84183450
E-mail: lynn@csb.com.cn

Username used for comment:
底部留言
Description:

Copyright © 2020 www.csb.com.cn All Rights Reserved 
浙ICP备11063484号  Powered by www.300.cn